Three (3) separate systems failed. 1. Upon seeing cars ahead of us slowing down, my husband pressed the breaks to slow down to avoid collision.
ブレーキ · 2026-08-26 · ODI 11759813 · 衝突
Moving about 55 miles per hour on right lane of I-95 the Jeep in front of me braked abruptly. I braked hard but as my Sienna was quickly slowing down to stop, the brake pad felt spongy when it was slower and as I pressed even harder, it seemed to have stopped…
ブレーキ · 2026-07-15 · ODI 11750717 · 衝突
When I driving slow and begin to brake the car does not slow down or stop. It feels like I'm hydroplaning.
ブレーキ · 2026-08-25 · ODI 11759391
While drive I'm approaching my driveway at about 20 MPH i proceed to turn into my drive and the car does stop or slow down it's like I'm on ice (very scary) Toyota says this is common on hybrids it seems to scary to drive
ブレーキ · 2026-08-25 · ODI 11759396
When apply the brake, the car will have sudden forward pushing.
ブレーキ · 2026-08-19 · ODI 11757932
FAILURE: Brake control system. Vehicle intermittently surges forward while braking at low speed, most often through a curve — the brakes momentarily release and the vehicle lurches before braking resumes.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS 番号 19V553000 · 2019-07-25 · 年式: 2018
概要: Vantage Mobility International, LLC (Vantage) is recalling certain 2012-2018 AMS Genesis wheelchair vans, built on a Toyota Sienna vehicles. The rubber brake hoses that attach to the rear wheel assembly may be too short, causing them to rub against the rear axle trailing arm.
対策: Vantage will notify owners, and dealers will install a set of rear brake hoses that will provide the proper clearance, free of charge. The recall began December 16, 2019. Owners may contact Vantage customer service at 1-800-488-9082.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS 番号 19V410000 · 2019-06-04 · 年式: 2018, 2019
概要: Braun Corporation (Braun) is recalling certain 2014-2019 Toyota Sienna mobility van conversions. The brake lines may have incorrect tube nut fittings installed, which may cause a pressure drop within the braking system.
対策: Braun has notified owners, and dealers will install an adaptor to correct the issue, free of charge. The recall began June 25, 2019. Owners may contact Braun customer service at 1-800-488-0359.